Configuration

Includes guides on setting up Direct Connects and the different notifiers of WIN-911 Version 7

Configuration: Setting up Groups in WIN-911
Introduction Groups in WIN-911 tie alarms with a list of operators who will get notified. If you are using one of the connection methods that supports i...
Fri, 27 Jan, 2017 at 3:34 PM
Setting up Filters in WIN-911 for FactoryTalk A&E
Introduction     Since there are no HMI tags within the FactoryTalk Alarm and Event server, the connection to alarms is made via WIN-911 Filters. In the...
Fri, 27 Jan, 2017 at 2:32 PM
Configuration: Setting up Phone-Book
Introduction All WIN-911 users are defined in the Phone Book, along with their contact methods, access codes and schedule assignments. The below section...
Mon, 30 Jan, 2017 at 5:32 PM
Running WIN-911 V7 as a Service
Introduction WIN-911 allows you to configure and run as a Window Service. Below is a guide on how to setup the WIN-911 Service, along with tips and tric...
Mon, 30 Jan, 2017 at 8:00 PM
Basic troubleshooting steps for V7 not sending any notifications
Problem WIN-911 V7 Pro will be working correctly then, all of a sudden, it will stop working. Alarms will be seen in Scan and Alarms and Alarm Log Manager ...
Thu, 9 May, 2019 at 10:53 AM
Changing the user for V7 Service Wrapper
DESIRED BEHAVIOR  If you want to change the user to something specific other than the Local System account, you will need to perform the following procedur...
Thu, 9 May, 2019 at 10:54 AM